Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
60 SKUs4 brands
Body Configuration: 45-elbowBody Configuration: accessoryBody Configuration: bulkheadBody Configuration: capBody Configuration: cutting-ringBody Configuration: lock-nutBody Configuration: run-teeClear all
IH-AD-JIC-051
JIC Male 74° Cone × SAE O-Ring Boss Run Tee
Indus Hydraulics-04 to -24UN/UNF 7/16-20 to 1.7/8-12
IH-AD-JIC-044
45° JIC Male 74° Cone × BSP Male O-Ring Adjustable Stud End
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-04 to -24
IH-AD-JIC-041
45° Elbow JIC Male 74° Cone × NPT Male
Indus Hydraulics45 elbowJIC 37° cone (74° included)
IH-AD-JIC-040
45° Elbow JIC Male 74° Cone Bulkhead
Indus Hydraulicsbulkheadup to 345 bar (5,004 psi), manufacturer stated
IH-AD-JIC-039
45° JIC Male 74° Cone
Indus Hydraulicsup to 345 bar (5,004 psi), manufacturer stated45 elbow
IH-AD-ORFS-031
ORFS Male O-Ring × BSP Male O-Ring Run Tee
Indus Hydraulics-04 to -16ORFS flat face with O-ring
IH-AD-ORFS-027
ORFS Male O-Ring × ORFS Female Run Tee
Indus Hydraulicsrun teeup to 630 bar (9,137 psi), manufacturer stated
IH-AD-BSP-074
45° Elbow JIS Gas Male 60° Cone × BSPT Male 60° Seat
Indus Hydraulics45 elbowBSP (G) G1/8-28 to G2-11
IH-AD-BSP-062
45° Elbow BSP Male 60° Seat × Metric Male
Indus HydraulicsBSP (G) G1/8-28 to G1.1/2-1145 elbow
IH-AD-MET-048
Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee
Indus Hydraulicsup to 315 bar (4,569 psi), manufacturer stated-14 to -45
IH-AD-DIN-051
Metric Bite Type 45° Elbow Reducer Tube Adaptor with Swivel Nut
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-DIN-049
Metric Bite Type 45° Elbow Male Adjustable Stud End
Indus Hydraulics-12 to -45Metric O-ring stud end
IH-AD-DIN-047
BSP Adjustable Stud End Run Tee
Indus HydraulicsMetric M12×1.5 to M42×2Metric O-ring stud end
IH-AD-DIN-046
Metric Bite Type 45° Elbow UN/UNF Adjustable Stud End
Indus Hydraulics-12 to -52Metric M12×1.5 to M42×2
IH-AD-MET-023
45° Metric Male O-Ring × Metric Male Adjustable Stud End
Indus Hydraulics-12 to -5245 elbow
IH-AD-MET-021
Metric Male O-Ring × Metric Female Run Tee
Indus Hydraulicsrun teeMetric M14×1.5 to M52×2
IH-AD-DIN-028
Bulkhead Union Metric
Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-013
Adjustable Run Tee m Metric X m Metric
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-012
Adjustable RunTee
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-007
Swivel Nut Run Tee (DIN 2353)
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-ORFS-005
Adjustable Run Tee m ORFS X m ORFS X m SAE
Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
IH-AD-JIC-031
Adjustable 45° Elbow m JIC X m Metric Flat
Indus Hydraulics45-elbow-04 to -32 (1/4" to 2")
IH-AD-HSF-010
Set of Bolts and Spring Washers
Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"
IH-AD-DIN-002
Lock Nut for Bulkhead
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none
IH-AD-JIC-010
Adjustable Run Tee m JIC X m JIC X m BSP
Indus Hydraulicsup to 350 bar (5000 psi)-04 to -32 (1/4" to 2")
From the blog
Written about this range
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Machine down
Forklift hose failure: mast, tilt or attachment
Three circuits, three very different failure patterns. Which one went, where the hose actually wears, and the safety step that gets skipped on every second job.
3 min read
Thread & fitting identification
JIC vs ORFS vs NPT vs BSP: the four connector families, compared
Four families cover almost every hydraulic connection you will meet. What each one seals on, which are re-makeable, and which pairs will thread together and still fail.
4 min read