Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
111 SKUs4 brands
Body Configuration: 90-elbowBody Configuration: accessoryBody Configuration: bulkheadBody Configuration: lock-nutBody Configuration: plugBody Configuration: run-teeBody Configuration: teeClear all
IH-AD-DIN-028
Bulkhead Union Metric
Indus HydraulicsbulkheadL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-022
Swivel Nut Elbow (DIN 2353)
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-DIN-018
Blanking Plug
Indus HydraulicsL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)L6 to L42 (light series), S6 to S38 (heavy series)
IH-AD-DIN-017
Blanking Plug with Nut for Cone
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)DIN 24° cone L-series and S-series (M10×1 to M42×2)
IH-AD-DIN-013
Adjustable Run Tee m Metric X m Metric
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-012
Adjustable RunTee
Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-DIN-007
Swivel Nut Run Tee (DIN 2353)
Indus HydraulicsDIN 24° cone L-series and S-series (M10×1 to M42×2)L-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)
IH-AD-BSP-052
Union Elbow
Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size
IH-AD-BSP-042
Male Stud Elbow NPT (BSP)
Indus HydraulicsBSPP G1/8 to G2 (parallel)up to 400 bar at smaller sizes; derates with size
IH-AD-BSP-036
Male Stud Elbow BSPT (BSP)
Indus HydraulicsBSPT R1/8 to R2 (taper)up to 400 bar at smaller sizes; derates with size
IH-AD-BSP-027
Swivel Male Elbow NPT
Indus HydraulicsBSPP G1/8 to G2 (parallel)up to 400 bar at smaller sizes; derates with size
IH-AD-BSP-015
Female Thread Elbow
Indus HydraulicsBSPP G1/8 to G2 (parallel)up to 400 bar at smaller sizes; derates with size
IH-AD-BSP-012
Hexagon Socket Plug
Indus Hydraulicsbonded-sealup to 400 bar at smaller sizes; derates with size
IH-AD-ORFS-018
Adjustable 90° Elbow m ORFS X m Metric Flat
Indus Hydraulicsup to 415 bar (6000 psi)90-elbow
IH-AD-ORFS-014
Adjustable 90° Elbow m ORFS X m SAE
Indus Hydraulicsup to 415 bar (6000 psi)ORFS UN/UNF (9/16-18 to 1-7/16-12)
IH-AD-ORFS-005
Adjustable Run Tee m ORFS X m ORFS X m SAE
Indus Hydraulics-04 to -16up to 415 bar (6000 psi)
IH-AD-SAEFL-005
90° Elbow Flange Connector m JIC X L-series flange
Indus HydraulicsL-series up to 210 bar (3000 psi); S-series up to 415 bar (6000 psi)37-cone
IH-AD-JIC-037
90° Elbow Connector m JIC
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)-04 to -32 (1/4" to 2")
IH-AD-JIC-032
Adjustable 90° Elbow m JIC X m SAE
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)90-elbow
IH-AD-JIC-028
Adjustable 90° Elbow m JIC X m Metric Flat
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-JIC-027
90° Elbow Connector m JIC X m NPT
Indus Hydraulics-04 to -32 (1/4" to 2")JIC 37° UN/UNF (7/16-20 to 1-7/8-12)
IH-AD-JIC-022
90° Elbow m JIC X m BSPT
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)up to 350 bar (5000 psi)
IH-AD-JIC-011
90° Male Female Connector m JIC X f JIC
Indus HydraulicsJIC 37° UN/UNF (7/16-20 to 1-7/8-12)37-cone
IH-AD-HSF-010
Set of Bolts and Spring Washers
Indus HydraulicsSAE J429 Grade 5 / Grade 8 bolt set with spring washers, matching SAE J518 4-bolt pattern1/2" to 5"
From the blog
Written about this range
Assembly, crimping & certification
Hose service in Sharjah, Ajman, Ras Al Khaimah and Fujairah: four different problems
Workshop density in Sharjah, quarry abrasion at Khor Khwair, port and bunkering equipment in Fujairah. Same hose, four failure patterns, four different service answers.
4 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read