Hoses & Fittings

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

15 SKUs4 brands

Hydraulic Hoses Thermoplastic Hoses Crimp Ferrules Hydraulic SAE Flanges Hydraulic Quick Couplers Ferrules Hydraulic Adapters Hydraulic Fittings Stainless Steel Hydraulic Fittings

Body Configuration: cross Body Configuration: double-flange Body Configuration: lock-nut Body Configuration: reducer Clear all

Showing 1–15 of 15 SKUs

Sort

Latest A–Z Z–A

IH-AD-JIC-002

Male Cross JIC

Indus Hydraulics-04 to -32 (1/4" to 2")up to 350 bar (5000 psi)

IH-AD-ORFS-001

Lock Nut ORFS

Indus Hydraulicslock-nut-04 to -16

IH-AD-HSF-002

BSP Threaded Double Flange

Indus Hydraulics1/2" to 5"Code 61 up to 210 bar (3000 psi); Code 62 up to 415 bar (6000 psi)

IH-AD-BSP-019

Thread Reducer

Indus Hydraulicsup to 400 bar at smaller sizes; derates with sizeG1/8 to G2

IH-AD-BSP-002

Female Thread Cross

Indus HydraulicsG1/8 to G2up to 400 bar at smaller sizes; derates with size

IH-AD-HSF-006

Socket Weld Double Flange

Indus HydraulicsSocket weld for tube/pipe end (1/2" to 5")weld

IH-AD-DIN-005

Union Cross

Indus HydraulicscrossL-series up to 250 bar (3625 psi); S-series up to 400 bar (5800 psi)

IH-AD-NPT-001

Female Cross NPT

Indus HydraulicscrossNPT 1/8" to 2"

IH-AD-DIN-002

Lock Nut for Bulkhead

Indus HydraulicsL6 to L42 (light series), S6 to S38 (heavy series)none

IH-AD-MET-002

Male Cross Metric

Indus HydraulicsMetric M10×1 to M42×2cross

IH-AD-JIC-001

Lock Nut JIC

Indus Hydraulicsnonelock-nut

IH-AD-DIN-024

Swivel Nut Union Tube End Reducer

Indus HydraulicsreducerDIN 24° cone L-series and S-series (M10×1 to M42×2)

IH-AD-BSP-001

Bulkhead Locknut

Indus Hydraulicsnonelock-nut

IH-AD-ORFS-033

ORFS Cross Fittings

Indus Hydraulics-04 to -24up to 630 bar (9,137 psi), manufacturer stated

IH-AD-HSF-003

NPT Threaded Double Flange

Indus Hydraulicsnpt-taperdouble-flange

From the blog

Written about this range

Assembly, crimping & certification

Getting a hydraulic hose made: what to bring and what we measure

Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.

3 min read

Thread & fitting identification

BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not

They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.

3 min read

Failure analysis

Hose routing: bend radius, twist and the failures they cause

Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.

3 min read