Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
90° Elbow ORFS Male O-Ring Bulkhead
90° Elbow BSP Male 60° Seat Bulkhead
JIS Metric Male 60° Cone Tee
90° Elbow Metric Male 74° Cone Bulkhead
Metric Male 74° Cone Tee
Set of Bolts and Spring Washers
O-Rings for SAE Hydraulic Flanges
From the blog
Written about this range
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Machine down
Forklift hose failure: mast, tilt or attachment
Three circuits, three very different failure patterns. Which one went, where the hose actually wears, and the safety step that gets skipped on every second job.
3 min read
Thread & fitting identification
JIC vs ORFS vs NPT vs BSP: the four connector families, compared
Four families cover almost every hydraulic connection you will meet. What each one seals on, which are re-makeable, and which pairs will thread together and still fail.
4 min read