Stainless Steel Danforth Anchors Crown Stock Anchor
Stainless Steel Danforth Anchors Crown Stock Anchor, in 4 sizes, 3 kg to 10 kg. Load rating on request. Indus part numbers.
Key features
- Product type: Stainless Steel Danforth Anchors Crown Stock Anchor
- Size range: 3 kg to 10 kg
- Size range
- 3 kg to 10 kg
- Material
- Stainless steel
- Finish
- Polished
Product description
Marine anchors for vessels, buoys and moorings. Stainless steel, polished.
Sizes
4 sizes, 3 kg to 10 kg. Every size has its own Indus part number in the table below.
No load rating is published for this range. Tell us the duty and we will confirm the rating with the quotation. Do not use it to lift until you have that rating in writing.
The lettered dimensions in the table refer to the dimension drawing shown with this product.
Manufacturer's data
- Laser, stamping, welding.
Choosing a size
Specify the anchor by type and weight, and state any classification society certificate the vessel needs.
Ordering
Quote the Indus part number from the size table, or send the size and rating you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Stainless Steel Danforth Anchors Crown Stock Anchor |
| Sizes | 4 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 3 kg to 10 kg |
Construction
| Parameter | Value |
|---|---|
| Material | Stainless steel |
| Finish | Polished |
Shipping & lead time
Sizes & part numbers
4 sizes| Indus part no. | Size | A (mm) | B (mm) | C (mm) | Weight (kg) |
|---|---|---|---|---|---|
| IH-LR-AN-SSDACSA-3KG | 3 kg | 585 | 400 | 270 | 3 |
| IH-LR-AN-SSDACSA-5KG | 5 kg | 590 | 450 | 285 | 5 |
| IH-LR-AN-SSDACSA-7KG | 7 kg | 660 | 450 | 315 | 7 |
| IH-LR-AN-SSDACSA-10KG | 10 kg | 705 | 500 | 430 | 10 |
Size — Nominal size as the manufacturer states it. A — Dimension A on the manufacturer dimension drawing. B — Dimension B on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Weight — Weight as the manufacturer publishes it. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
What sizes does the stainless steel danforth anchors crown stock anchor come in?▾
How are anchors specified?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Stainless Steel Delta Anchor DT Type
Stainless Steel Four Prong Grapnel Anchor
Admiralty Anchor — GB 545-96
Baldt Stockless Anchor
Bruce / Claw Anchor
Danforth Anchor
Folding Grapnel Anchor
