Tubing Head, API 6BX 5K, Standard Service

The Tubing Head, API 6BX 5K, Standard Service is an tubing head for upstream oil and gas wellhead service, 5K class (5,000 psi working pressure), standard rated. Standard service rated for clean hydrocarbon and water-cut wellbores.

Construction

• Component: Tubing Head
• Nominal size: 11 in × 2-9/16 in or 2-1/16 in tubing
• Vertical through-bore: 2-9/16 in or 2-1/16 in (tubing-spec dependent)
• Top connection: API 6BX 5K studded flange — 11 in, BX-156 ring groove
• Bottom connection: API 6BX 5K studded flange — to mate with casing head
• Body material: Forged alloy steel (AISI 4130), normalised and tempered
• Material class: AA (API 6A)
• Temperature class: P (API 6A)

Performance

Working pressure 5,000 psi (5K class). Manufactured to API 6A, PSL 2 (Product Specification Level), PR1 (Performance Requirement). Hydrostatic body and ring-groove tests at 1.5× shell pressure on every unit.

Applications

• Production well tubing landing
• Onshore conventional oil and gas wellheads
• Mature-field workover wellhead replacement

OEM equivalents and compatibility

This component is supplied as a recognised dimensional and metallurgical interchange for the following OEM wellhead product lines (no implied authorised-distributor relationship — supplied by Indus Hydraulics):

• Cameron Type C 5K
• FMC SDX 5K
• Stream-Flo SD 5K
• NOV ML-15

Compliance

• API 6A design and manufacture
• API 6A material class: AA
• API 6A temperature class: P
• PSL 2 / PR1
• EN 10204 3.1 / 3.2 mill test reports
• Ring-groove dimension certificates and hardness reports

How to order

Confirm on your RFQ: (a) wellhead bowl size and tubing / casing bore, (b) working pressure and pressure class, (c) top and bottom connection geometry (studded vs flanged, ring-groove series), (d) service class — sour (NACE MR0175) or standard, (e) temperature class, (f) PSL and PR requirements, (g) any custom porting (kill / circulation / instrumentation outlets), and (h) certification requirements. Indus quotes ex-Dubai with full API 6A traceability and OEM-source documentation on request.

Companion products

Pair with matched-class wellhead gate valves (manual or hydraulic), API 6BX flanges, ring-joint gaskets, BSL bolting, casing / tubing hangers, and tree caps in the same pressure class. For frac applications, stack into a frac tree with master valves, swab valves, wing valves, and pressure-release manifolds.