Eaton FD14 — Push-to-Connect Oil Drain Coupling (FLOCS)

The Eaton FD14 — Push-to-Connect Oil Drain Coupling (FLOCS) is a specialty quick-disconnect coupling from Eaton's Aeroquip range. Low-profile push-to-connect oil drain coupling for Eaton's FLOCS (Fast Lube Oil Change System). Provides a leak-free drain port and pre-fill purging port for mobile-equipment oil-evacuation systems.

Working pressure to 3.5 bar (51 psi) at the smallest body size, with minimum burst pressure of 7 bar. Push-to-Connect connection — valved (self-sealing poppet) variant.

Construction & features

• Connection method: Push-to-Connect
• Valving: Valved (Self-sealing Poppet)
• Low-profile design for tight engine-bay installations
• Push-to-connect female half — one-hand operation
• Multiple sealing mechanisms for leak-free service
• Copper-crush gasket for port-face seal
• Compatible with Eaton FLOCS (Fast Lube Oil Change System)
• Very low pressure (50 psi) — drain / purge service only, NOT pressure containment
• Interchanges with: Eaton FLOCS (Fast Lube Oil Change System) compatible

Available variants — specify in your RFQ

Indus quotes the full FD14 range; specify the configuration that matches your hose end and operating envelope. The Eaton part-number scheme is FD14-XXXX-AA-BB (series, half/material code, port thread size in 16ths of an inch, nominal coupling size in 16ths of an inch).

• Coupling halves: Male, Female (push-to-connect)
• Body sizes: 3/8" body size only
• Body materials: Carbon Steel (zinc trivalent chromate plated) with zinc die-cast valve
• Seal materials: Viton (male half), Buna-N (female half)
• Port thread types: Multiple port styles for male half

Sample part numbers: FD14-1001-06-06, FD14-1002-06-06. The full part-number matrix is available on request — Indus will quote any standard configuration in the Eaton catalogue.

Performance

• Maximum operating pressure: 3.5 bar (51 psi) at the smallest size; derates with diameter
• Minimum burst pressure: 7 bar (102 psi)
• Rated flow (largest size): up to 12 L/min
• Vacuum rating: 28 in./Hg
• Operating temperature range: -20°C to +200°C (varies by seal compound; specify in RFQ)

Applications

• Automated oil-evacuation systems on mobile equipment
• Gravity-drain oil-evacuation systems
• Engine oil change service ports
• Hydraulic reservoir drain ports

How to order

Confirm (a) the exact Eaton part number you require, or (b) the configuration parameters: coupling half (male / female / complete set / repair kit / dust cap), body size, port thread type and designation, seal compound, body material. Indus will quote ex-Eaton with full mill certification, NACE / ABS / Lloyd's options on request, and air-freight or sea-freight options to UAE / GCC. Standard lead time 14 days from order; in-stock items ship same week.

Companion products

Indus also stocks the matching dust caps, dust plugs, and seal repair kits for this series — ask for them on the same RFQ. For hose assemblies terminated with this coupler, request a complete hose-end assembly quote and we will supply the assembly tested at 1.5× working pressure with witness-test certificate.