Eaton 5600 — ISO 7241/1 Series A Valved Hydraulic Quick Coupler

The Eaton 5600 — ISO 7241/1 Series A Valved Hydraulic Quick Coupler is a hydraulic quick-disconnect coupling from Eaton's Aeroquip range. Low-profile ISO 7241/1 Series A valved coupler with PUSH-PULL™ ball latch and streamlined poppet valving — minimum pressure drop. The European-standard hydraulic interchange.

Working pressure to 350 bar (5076 psi) at the smallest body size, with minimum burst pressure of 1050 bar. Push-Pull Ball Latch connection — valved (self-sealing poppet) variant.

Construction & features

• Interchange standard: ISO 7241/1 Series A
• Connection method: Push-Pull Ball Latch
• Valving: Valved (Self-sealing Poppet)
• Meets ISO 7241/1 Series A dimensional requirements
• PUSH-PULL™ ball latch — one-hand operation
• Streamlined poppet valving — minimum pressure drop
• Self-sealing poppet valves
• Low-profile body for tight installations
• Three seal materials: Buna-N (general), Viton (high-temp/aromatic), EPR (water/glycol/Skydrol)
• Interchanges with: Parker 6600, Snap-tite 72, Faster TGV, Hansen LL-Series

Available variants — specify in your RFQ

Indus quotes the full 5600 range; specify the configuration that matches your hose end and operating envelope. The Eaton part-number scheme is 5600-XXXX-AA-BB (series, half/material code, port thread size in 16ths of an inch, nominal coupling size in 16ths of an inch).

• Coupling halves: Male, Female, Complete Set, Dust Cap, Dust Plug, Repair Kit
• Body sizes: 1/4", 3/8", 5/8", 3/4", 1"
• Body materials: Carbon Steel (zinc trivalent chromate plated; brass poppet guide in 1/4" size)
• Seal materials: Buna-N, Viton, EPR
• Port thread types: Female NPT, Female SAE O-ring

Sample part numbers: 5600-1001-04-04, 5600-1002-08-10, 5600-1000-12-12, 5600-1070-06-06, 5600-1064-16-16. The full part-number matrix is available on request — Indus will quote any standard configuration in the Eaton catalogue.

Performance

• Maximum operating pressure: 350 bar (5076 psi) at the smallest size; derates with diameter
• Minimum burst pressure: 1050 bar (15229 psi)
• Rated flow (largest size): up to 189 L/min
• Vacuum rating: 28 in./Hg
• Operating temperature range: -40°C to +200°C (varies by seal compound; specify in RFQ)

Applications

• Agricultural equipment hydraulics
• Construction equipment hydraulics
• Dump, snow plough and maintenance vehicles
• In-plant manufacturing hydraulic fluid transfer
• Hydraulic systems built to European/ISO Series A standard

How to order

Confirm (a) the exact Eaton part number you require, or (b) the configuration parameters: coupling half (male / female / complete set / repair kit / dust cap), body size, port thread type and designation, seal compound, body material. Indus will quote ex-Eaton with full mill certification, NACE / ABS / Lloyd's options on request, and air-freight or sea-freight options to UAE / GCC. Standard lead time 14 days from order; in-stock items ship same week.

Companion products

Indus also stocks the matching dust caps, dust plugs, and seal repair kits for this series — ask for them on the same RFQ. For hose assemblies terminated with this coupler, request a complete hose-end assembly quote and we will supply the assembly tested at 1.5× working pressure with witness-test certificate.