Eaton 5600 — ISO 7241/1 Series A Non-Valved Hydraulic Quick Coupler

The Eaton 5600 — ISO 7241/1 Series A Non-Valved Hydraulic Quick Coupler is a hydraulic quick-disconnect coupling from Eaton's Aeroquip range. Non-valved variant of the 5600 ISO 7241/1 Series A coupler — straight-through bore for maximum flow. For systems with upstream line valving.

Working pressure to 350 bar (5076 psi) at the smallest body size, with minimum burst pressure of 1050 bar. Push-Pull Ball Latch connection — non-valved variant.

Construction & features

• Interchange standard: ISO 7241/1 Series A
• Connection method: Push-Pull Ball Latch
• Valving: Non-Valved
• Non-valved straight-through bore — minimum pressure drop
• Will not operate with valved halves
• Same body and latch as the 5600 valved variant
• Interchanges with: Parker 6600 NV, Faster TGV NV

Available variants — specify in your RFQ

Indus quotes the full 5600 range; specify the configuration that matches your hose end and operating envelope. The Eaton part-number scheme is 5600-XXXX-AA-BB (series, half/material code, port thread size in 16ths of an inch, nominal coupling size in 16ths of an inch).

• Coupling halves: Male, Female, Complete Set, Dust Cap, Dust Plug
• Body sizes: 1/4", 3/8", 5/8", 3/4", 1"
• Body materials: Carbon Steel (zinc plated)
• Seal materials: Buna-N, Viton, EPR
• Port thread types: Female NPT, Female SAE O-ring

Sample part numbers: 5600-1044-04-04, 5600-1047-08-10, 5600-1061-12-12. The full part-number matrix is available on request — Indus will quote any standard configuration in the Eaton catalogue.

Performance

• Maximum operating pressure: 350 bar (5076 psi) at the smallest size; derates with diameter
• Minimum burst pressure: 1050 bar (15229 psi)
• Rated flow (largest size): up to 189 L/min
• Vacuum rating: 28 in./Hg
• Operating temperature range: -40°C to +200°C (varies by seal compound; specify in RFQ)

Applications

• Bulk fluid transfer (suction-side returns)
• Tool change-over where flow restriction is critical
• Lubrication line transfers

How to order

Confirm (a) the exact Eaton part number you require, or (b) the configuration parameters: coupling half (male / female / complete set / repair kit / dust cap), body size, port thread type and designation, seal compound, body material. Indus will quote ex-Eaton with full mill certification, NACE / ABS / Lloyd's options on request, and air-freight or sea-freight options to UAE / GCC. Standard lead time 14 days from order; in-stock items ship same week.

Companion products

Indus also stocks the matching dust caps, dust plugs, and seal repair kits for this series — ask for them on the same RFQ. For hose assemblies terminated with this coupler, request a complete hose-end assembly quote and we will supply the assembly tested at 1.5× working pressure with witness-test certificate.