Hand-built bespoke hose assemblies for ship-to-shore, ship-to-ship, chemical, and bulk-material transfer. Built to customer specification with rubber liner compounds matched to the application — fuels, oils, sea water, dry powders, sand, animal feed, abrasives.
The Bulkstream Hand-Built Hose Assembly (Dixon part code BULKSTREAM) is a Specialist & Custom-Built Hose from the Dixon Group Europe industrial hose range. Indus Hydraulics is an authorised Dixon distributor in the UAE.
Hand-built bespoke hose assemblies for ship-to-shore, ship-to-ship, chemical, and bulk-material transfer. Built to customer specification with rubber liner compounds matched to the application — fuels, oils, sea water, dry powders, sand, animal feed, abrasives.
Hand-built and custom-engineered hose assemblies — Bulkstream rubber-compound hand-built hoses (51-1000 mm bore), heat-traced/jacketed hoses with electric heat-trace cabling, and GSM ball-joint armoured hoses for steel mill / foundry service.
All Dixon hose assemblies are compliant with the Pressure Equipment Directive 2014/68/EU. Dixon Group Europe manufactures and engineers to BSI ISO 9001 with over 100 years' experience.
Specify (a) the inner diameter from the size range, (b) the assembly length, (c) end-fitting requirements (Dixon supplies a full range of cam & groove, brass, hygienic, steam, and quick-release couplings), and (d) any special requirements such as Lloyd's certification or third-party witness testing. Indus engineering will confirm the assembly drawing on the RFQ.
Pair with Dixon's matching couplings and accessories (Cam & Groove, Boss steam couplings, hose clamps, Holedall permanently-attached fittings, hose tags, and Spiral Hose Guard / Fire Jacket protective sleeves) — full range available on quote.
| Parameter | Value |
|---|---|
| Application Family | specialist |
| Manufacturer Part Code | BULKSTREAM |
| Hose Branding (Printed) | Lloyd's Approval available; standard hoses upon request |
| Parameter | Value |
|---|---|
| Inner Diameter Range | 51 mm to 1000 mm (NB: maximum length determined by mandrel length of relevant bore size) |
| Min Bend Radius | Per assembly drawing |
| Weight | Per assembly drawing |
| Parameter | Value |
|---|---|
| Max Working Pressure | 3.5 bar to 40 bar |
| Min Burst Pressure | Per BS EN 1765 (ship-to-shore/ship-to-ship) or EN 12115 (chemical) |
| Operating Temperature | -30°C to +150°C (depending on rubber compound) |
| Safety Factor | 4:1 |
| Parameter | Value |
|---|---|
| Cover Material | Smooth or corrugated rubber cover |
| Lining / Tube Material | Rubber compound liner (NBR / EPDM / NR / SBR / CSM Hypalon / FPM Viton / CR Chlorobutyl per application) |
| Reinforcement | Hand-built textile / wire reinforcement (built-in or crimped ends) |
| Parameter | Value |
|---|---|
| Applicable Standards | Pressure Equipment Directive 2014/68/EU; ISO 9001 manufacturing |